Sony HCD-GN600 Service Manual page 19

QQ
3 7 63 1515 0
[CD SHIP MODE (WITHOUT MEMORY CLEAR)]
• This mode moves the optical pick-up to the position durable to
vibration. Use this mode when returning the set to the customer
after repair.
Procedure:
1. Press button to turn the set ON.
?/1
2. Select CD function.
[CD]
3. Press button and
will power off automatically.
4. After the "STANDBY" blinking display finish, a message
"LOCK" is displayed on the fluorescent indicator tube and the
CD ship mode is set.
[CD POWER MANAGE]
• This mode let you switch on or off power supply to the BU
during TUNER function.
• When CD POWER is set to OFF, the power supply to the BU is
cut off during TUNER function. It will increase the time taken
to access CD when function change from TUNER to CD but it
will improve tuner reception.
• When CD POWER is set to ON, the power supply to the BU is
not cut off during TUNER function. It will reduce the time taken
to access CD when function change from TUNER to CD but it
will decrease tuner reception performance.
Procedure:
1. Press button to turn the set ON.
?/1
2. Select CD function.
3. Press button to turn the set OFF.
?/1
TE
L 13942296513
4. Press button and
x
power on automatically.
5. The message "CD POWER ON" or "CD POWER OFF" will
be displayed on the fluorescent indicator tube.
www
.
http://www.xiaoyu163.com
button simultaneously. The set
?/1
button simultaneously. The set will
?/1
x ao u163
y
i
http://www.xiaoyu163.com
2 9
8
[CD TRAY LOCK MODE]
• This mode let you lock the disc trays. When this mode is
activated, the disc tray will not open when
[DISC SKIP/EX-CHANGE]
button or
message "LOCKED" will be displayed in the will be displayed
on the fluorescent indicator tube.
Procedure:
1. Press button to turn the set ON.
?/1
2. Select CD function.
3. Press x button and
and hold down until "LOCKED" or "UNLOCKED" displayed
on the fluorescent indicator tube (around 5 seconds).
[MD/VIDEO SWITCHING]
• This mode let you switch from MD to VIDEO and vice-versa.
Procedure:
1. Press button to turn the set ON.
?/1
2. Select MD function.
[MD (VIDEO)]
3. Press
The function will change to VIDEO. Press the same buttons
again to change from VIDEO to MD.
Q Q
3 6 7 1 3 1 5
co
.
HCD-GN600
9 4 2 8
Z
OPEN/CLOSE
button is pressed. The
button simultaneously
Z
OPEN/CLOSE
button and button simultaneously.
?/1
0 5 8 2 9 9 4 2 8
m
9 9
9 9
19