Page 1
NSX-VC18 SX-NBL17 • This Service Manual contains information about the difference between NSX-VC18(HC) and NSX-VC18(HR,HT). If requiring the other information, see Service Manual of NSX-VC18(HR,HT), (S/M Code No. 09-005-429-2R1). • If requiring information about the CD mechanism, see Service Manual of AZG-1, (S/M Code No.
CHIP RESISTOR PART CODE Chip Resistor Part Coding Figure Resistor Code Value of resistor Chip resistor Dimensions (mm) Symbol Wattage Type Tolerance Resistor Code Form 1/16W 1005 0.35 1/16W 1608 0.45 1/10W 2125 1.25 0.45 1/8W 3216 0.55 TRANSISTOR ILLUSTRATION E B C 2SC5343 –...
Page 14
ADJUSTMENT < TUNER SECTION > 2. MW VT Check Settings : • Test point : TP1 (VT) Method : Set to MW 1602kHz and check that the test point is less than 8.0V. Then set to 531kHz and check that the test point is more than 0.3V.