Adjustment Process Mode Menu - Sharp LC-40LE730E Service Manual

LC-40LE730
LC-46LE730

5. Adjustment process mode menu

Sub
page
Page Line
1
2
3
4
5
2/8
6
3/8
7
4/8
8
5/8
9
6/8
Item
Main Version LE730E v1.253 790.173.78 v14 Informative only (Main microprocessor version)
FRC
HardwareVersion
None / Remote Control /
Normal Standby Cause
INIT
Factory Init
Inch Setting
Center Acutime
RESET
TUNER
EEP, Autoinstallation, Option,
ETC
EEP Clear
EEP Clear B
Standby cause reset
Autoinstallation SW
Pattern
L Error Counter
L Error Reset
PUBLIC MODE PUBLIC MODE Submenu
Power On fixed
Maximum volume
Volume fixed
Volume fixed Level
RC button
Panel button
Menu button
Input mode start
Input mode fixed
Input TV mode program
number
RC path through
Hotel mode
Reset
Commit
On screen display
SMART LOADER SMART LOADER Submenu
Save settings to USB "Wait..." and "OK" when finish
Load settings from USB "Wait..." and "OK" when finish
ADC ADJUST ADC ADJUST Submenu
MODE
ADJUST
R-GAIN
Description Remarks (adjustment details, etc.)
2.3.0.180.390-290 Informative only (FRC version)
SHARP 691 Informative only
Keyboard...
Informative only
Factory Init Submenu
Press "►" or "OK" to enter to Factory Init Submenu
Informative (EURO/RUSSIA/NORDIC/UK/EAST
EUROPE)
EURO
40" Panel type (40" / 46")
0 H 0 M Backlight ON accumulated Time
► Press "►" to reset Center Acutime
NuTUNE Press "►" or "OK" to slect (Nutune / LG)
Country, L Error...
Press "►" or "OK" to enter to ETC Submenu
► Press "►" to Clear NVM data
Press "►" to Clear NVM data (except adjustments
area).
►
► Press "►" to Reset of STANDBY CAUSE.
Off
0 Selection of internal pattern from 0 to 6
0 Function is not available
► Function is not available
Press "►" or "OK" to enter to PUBLIC MODE
Submenu
Variable Press "►" to change Variable/Fixed.
60 Press "►" to change 0/60.
Variable Press "►" to change Variable/Fixed.
20 Press "►" to change 0/60.
Respond Press "►" to change Respond/No respond.
Respond Press "►" to change Respond/No respond.
Respond Press "►" to change Respond/No respond.
Normal Press "►" to change Normal/TV/SCART/...
Variable Press "►" to change Variable/Fixed.
0 Press "►" to change 0 → 1 → 2 ...999 ).
Press "►" to change On/Off (required external
module)
Off
Off Press "►" to change On/Off.
► Press "►" to return to factory settings.
► Press "►" to confirm.
On Press "►" to change On/Off.
Press "►" or "OK" to enter to SMART LOADER
Submenu
Press "►" to Save.
the process
Press "►" to Load.
the process
Press "►" or "OK" to enter to ADC ADJUST
Submenu
YPbPr(SD) Only for Engineering purpose (Please don't use)
Int. signal Only for Engineering purpose (Please don't use)
272 Only for Engineering purpose (Please don't use)
28
►