Seat Heaters And Ventilation; Customized Features - Acura MDX 2016 Owner's Manual

VEHICLE CONTROLS

Seat Heaters and Ventilation*

Quickly warm or ventilate the seats when the vehicle is on.
Front Seat Heaters or Ventilation
Use the on-Demand Multi-Use Display (oDMD) touchscreen to operate the
front seat heaters or ventilation.
Close the menu
-: Decrease heating
or ventilation levels.
OFF: Turn the
system off.
When the vehicle is turned off, the heating or ventilation setting returns to off at
the next vehicle start. If AUTo is selected, the setting remains in AUTo.
Second-Row Outer Seat Heaters*
Press the seat heater button on the back of the
center console to cycle through settings: HI, MID,
Lo, and oFF. Indicators appear for each setting.
WARNING
Heat-induced burns are possible when using seat heaters.
Persons with a diminished ability to sense temperature (e.g., persons with
diabetes, lower-limb nerve damage, or paralysis) or with sensitive skin should
not use the seat heaters.
50 |
ODMD screen
Select to enter the seat
heating or ventilation screen.
Select Lo, MID, or
HI level.
+: Increase heating
or ventilation levels.
AUTO: The
system selects
the best setting
based on ambient
temperature.
*if equipped

Customized Features

You can easily customize many features of your vehicle. The customized settings
are recalled every time you unlock the driver's door with the remote (Driver 1 or
Driver 2). Settings are unique to each remote.
How to Change a Setting
The vehicle must be in Park (P) to select vehicle Settings. Use the interface dial to
make and enter selections.
1. Press SeTTINGS.
2. Select an option (System, vehicle, Camera, Audio, Phone, Info, or Navi*).
3. Select a setting option, and make your preferred changes.
4. Press BACK to exit out of the menus.
Setting the Clock
on vehicles without navigation, use the interface dial to adjust the time in the
clock display. on vehicles with navigation, the time is automatically set using
GPS signals.
1. Press SeTTINGS.
2. Select System Settings.
3. Select Clock Adjustment.
4. rotate the interface dial to change the hour value. Press the interface dial to
select minutes, and rotate to change the value. Press the interface dial to exit
the screen.
5. Press BACK to exit out of the menus.
VEHICLE CONTROLS
Settings screen
BACK Interface SETTINGS
button dial button
*if equipped
| 51