Advertisement
AXIS 205 Quick Installation Guide
Manual Installation using AXIS IP Utility
Requirements:
Computer
on a LAN
AXIS IP Utility
AXIS IP Utility is a Windows software application that installs the AXIS 205 Network Camera to your local network
using a static IP address.
•
Download the AXIS IP Utility software to your computer, free of charge from the Support pages at
http://www.axis.com/techsup/software
•
Double-click the setup.exe file and follow the on-screen instructions to install the software on your computer.
Follow these instructions:
1. Acquire an unused IP address for your AXIS 205. (AXIS IP Utility detects the IP
address subnet your computer is connected in. The AXIS 205 must be connected on
the same subnet.)
2. Connect the AXIS 205 to your local network using a standard (RJ-45) network cable
(see Hardware Installation, on page 2).
3. Connect the power to the camera (see Hardware Installation, on page 2).
4. Start AXIS IP Utility on your
computer.
5. Enter the serial number:
The serial number (S/N) is on the
label on the back of the AXIS 205
6. Enter the IP address acquired for
your AXIS 205 and click Set IP.
7. When prompted by AXIS IP Utility, restart the camera by disconnecting and
reconnecting the external power supply.
8. A message confirming that the IP address has been set will be displayed, click OK.
9. Click View Home Page to access the AXIS 205 Network Camera's Web pages.
10. Please refer to Accessing the AXIS 205, on page 5 for instructions on how to set the
password to the AXIS 205.
Note:
11.
If this installation was not successful, try the Alternative Installation Method - ARP / Ping, on page 6
AXIS 205 Network Camera
Page 4 of 6
Hub/Switch
The serial number
starts with 00408C
and is followed by
6 unique
characters
Advertisement
