Canon mp628 Service Manual page 4

Carriage rail
position adjustment
N
LAN resetting
Wired / Wireless
LAN setting
information display
N: New adjustment item
*1: New Service Tool that operates only on a pre-registered computer.
- The red screws securing the paper feed motor may be loosened only at replacement of the paper feed motor unit.
- For print head alignment, perform the manual print head alignment using plain paper.
(2) Periodic maintenance
No periodic maintenance is necessary.
(3) Periodic replacement parts
There are no parts in this machine that require periodic replacement by a service engineer.
(4) Replacement consumables
There are no consumables that require replacement by a service engineer.
- At carriage unit replacement
- At carriage unit removal
- At logic board replacement
- At WLAN board replacement
- At confirmation of the
network setting
To set the carriage rail to the
original position prior to removal
or replacement of the carriage
unit, put a mark on the main
chassis before removal of the
carriage unit.
To initialize the network setting.
To confirm the network setting.
2 / 44
at the same
time.)
None. 1 min.
None. 1 min.
Perform in the user
mode.
- Machine buttons
- Host computer (IJ
Network tool)
None. 1 min.
Perform in the user
mode.
- Machine buttons
- Host computer (IJ
Network tool)