Motorola KRZR K1m Owner's Manual page 41

pair with headset,
handsfree device, or
computer
Before you try to connect to another
Bluetooth device, make sure your phone's
Bluetooth power is On and the device is in
pairing mode (see the user guide for the
device you are attempting to pair with). You
cannot perform pairing while your phone is
connected to another device.
To pair your phone to a headset accessory,
handsfree car kit, or PC that supports
Bluetooth wireless connections:
Find it: s > w Settings > Connection
> Bluetooth Link > Handsfree > [Look For Devices]
Your phone displays a list of device(s) located
within range of the phone. If your phone is
already connected to a device, your phone
lists that device and identifies it with a \ (in-
use indicator). Once a connection is
established with a device, no other device can
connect to your phone until the currently
connected device is disconnected.
1 Highlight a device in the list of devices
your phone found.
2 Press the center key s to connect the
device.
3 If the device requests permission to bond
with your phone, select YES and enter the
device PIN code to create a secure
connection with the device.
Note: The default PIN code is 0000.
When the connection is made, the à
(Bluetooth) indicator or a Bluetooth message
displays in the home screen.
Tip: For specific information about an
accessory, refer to the instructions that came
with it.
main attractions 39