4-1 Remove the Pedestal
5 screw.(ST4*16)
Lay down the unit so that rear
cover faces upward .
Remove the five screw from the rear
cover indicated by blue line.
Then remove the pedestal.
4-2 Remove the Back Cover
12 screw.(ST4*12)
Remove the fourteen scre w indicated
on figure above by blue line.
Then remove the back cover from the
unit.
4-3. Remove the speaker
4 screw.(ST4*16)
Remove the four screw from the speaker
indicated on figure above by blue line.
4-4 Remove the power module
2 screw.(ST3*10)
Remove the four screw indicated on the
figure above by blue line .
Then remove the power module.
4 screw.(M4*8)