Canon imageRunner 2545i Addendum Manual page 18

3
Select whether or not to enable the Remote UI and SSL communication .
● If you want to enable the Remote UI and access the machine using SSL:
☐
Press [On].
☐
Press [On] for <Use SSL>.
☐
Press [OK].
To enable SSL communication for the Remote UI, an SSL key pair must be generated and set as the
default key.
(See "Generating a Key Pair for SSL Communications, " on p. 9, and "Setting the Default Key for SSL
Communications, " on p. 13.)
● If you want to enable the Remote UI and access the machine without using SSL:
☐
Press [On].
☐
Press [Off ] for <Use SSL>.
☐
Press [OK].
● If you want to disable the Remote UI:
☐ Press [Off ] → [OK].
Enabling the Remote UI opens the machine's http/https port. If the port is left open, an unauthorized
user may try to access the machine from the open port. Disabling the Remote UI is recommended if
you do not plan to use it.
4
Restart the machine .
Turn OFF the machine, wait at least 10 seconds, and then turn it ON.
1
Updates Regarding Additional Functions