Table of Contents
Advertisement
Memory
Storing a Pause
Use the Redial/Pause button to insert a pause when a delay is needed in the dialing
sequence (for example, when you must dial a 9 to get an outside line or when you must
enter codes to access your bank's information line).
Dialing a Stored Number
If the number is stored in the Directory Memory,
1. Pick up the handset, or press Speaker or Headset.
2. Wait for the dial tone.
3. Press the Directory button, and use the Review 3 or 4 button to find the number.
4. Press the Dial button and the number automatically dials.
If the number is stored in the Direct Access Memory,
1. Pick up the handset, or press Speaker or Headset.
2. Wait for the dial tone.
3. Press the Memory location button, and the number automatically dials.
30
Advertisement
Table of Contents
