Remote Access; Using The Handset; Memory Full - GE 25880 User Manual

Remote Access

This section explains two types of remote access: using the cordless
handset to access the answering system and accessing the answering
system from another phone.
You may access the answering system on the base with the handset buttons.
You may also access your answering system from any touch-tone phone by
entering a 3-digit security code after you hear the outgoing announcement.
A voice menu system guides you through the steps.

Using the Handset

Press the format/answerer button to access the answering system.
After you access the answering system, use the marked handset keys
just as if you were pressing the corresponding buttons on the base (see
"Answering System Operation" for details on functions).To make it easy
for you, the functions are listed on the handset above each number. For
example, to play messages:
1. Press the format/answerer button.
2. Press the 2 key (play/stop) and mailbox number.
3. When you are finished listening to your messages, press format/
answerer again to quit, or you may listen to the voice menu at any time
by pressing 7.
Answering System Indicator
The answering system is active by default.The display will show
ANSWERER OFF when the answering system is turned off.

Memory Full

When the answering system's memory is full, the system answers after 10
rings, beeps, and waits for you to enter the 3-digit security code.You have
10 seconds to enter the security code before the phone hangs up.
You should erase some of the messages in order for the system to record
incoming messages.
37