Table of Contents
Advertisement
■
Canceling and resuming the constant speed control
■
Cruise control can be set when
●
Automatic transmission:
The shift lever is in the D or range 3 (standard type), or in the D or range
4 or higher of S has been selected (multi-mode type).
●
Vehicle speed is above approximately 25 mph (40 km/h).
■
Accelerating after setting the vehicle speed
●
The vehicle can be accelerated normally. After acceleration, the set
speed resumes.
●
Even without canceling the cruise control, the set speed can be
increased by first accelerating the vehicle to the desired speed and then
pushing the lever down to set the new speed.
Pulling the lever toward you
cancels the constant speed
control.
The speed setting is also can-
celed when the brakes are
applied or the clutch pedal
(manual transmission only) is
depressed.
Pushing
resumes
speed control.
Resuming is available when
the vehicle speed is more
than approximately 25 mph
(40 km/h).
I n f o r ma t i o n P r o v i d e d b y :
2-4. Using other driving systems
the
lever
the
2
up
constant
171
Advertisement
Table of Contents
