Motorola E398 GSM Service Manual page 22

Disassembly
22
3. At the top of the front housing, gently pry up and lift the transceiver PC board
out of the front housing.
Front
Housing
Figure 8. Removing and Replacing the Transceiver PC Board
4. To replace, insert the bottom of the circuit board into the bottom of the front
housing (display side down) and gently press the top of the circuit board into
the front housing.
5. Replace the rear housing, battery, and battery cover as described in the
procedures.
April 21, 2004
E398/E399 GSM
Transceiver PC Board
Disassembly
Tool
6809480A37-O