Charging The Battery - Motorola E398 series Owner's Manual

Charging the Battery

New batteries are shipped partially charged. Before
you can use your phone, you need to install and charge
the battery as described below. Some batteries
perform best after several full charge/discharge cycles.
Action
1 Insert the travel
charger plug into
your phone with the
release tab facing
up. Make sure that
both of the plug's
connector hooks engage to lock the plug in
place.
Note: It may take up to 10 seconds for your
phone to provide a visible or audible indication
that the battery is charging.
2 Plug the other end of the travel charger into the
appropriate electrical outlet.
3 When your phone indicates Charge Complete, press
the release tab and remove the travel charger.
Tip: You can safely leave the travel charger connected to
the phone after charging is complete. This will not damage
the battery.
14
032392o