Prepare Installation Space; Cutout Dimensions; Installation Procedure; Secure Cooktop To Countertop - Bosch NEM5466UC Installation Manual

Prepare Installation Space

Create the cut-out in the countertop according to the
installation diagram. The angle of the cut surface to the
countertop must be 90°.
The lateral cut-out edges must be flat in order to ensure
that the retaining springs are well-positioned on the
appliance. With multi-layered countertops, secure strips
laterally in the cut-out if necessary.
After creating cut-out, remove shavings. Seal cut
surfaces in a heat- and water-resistant manner.
Observe minimum distance between device underside
and furniture parts of /
3
8

Installation Procedure

CAUTION
9
Sharp edges. Use protective gloves when installing
the cooktop.

Secure cooktop to countertop

The cooktop should be secured to the countertop using
the clamps provided.
" (10 mm).

Cutout dimensions

Prior to inserting cooktop into cutout, attach clamps to
1.
the corresponding slots.
5