Belt Clip & Optional Headset - AT&T TL71108 User Manual

Getting started
Belt clip & optional headset
For handsfree headset conversations, use any industry standard
2.5 mm headset (purchased separately). For best results, use an
AT&T 2.5 mm headset. To purchase a headset, visit our website
www.telephones.att.com
at
In Canada, dial
To attach the
belt clip:
Snap the belt clip
into the retaining
tabs on both sides
of the handset as
shown in the figure.
1 (866) 288-4268
Plug a 2.5 mm
headset into the
jack on the side
of the handset.
1 (800) 222-3111
or call
.
Lift the rubber
flap here.
Side of handset.
11
To remove the belt
clip:
Gently lift either of the
belt clip retaining tabs,
shown in the figure,
outwards to remove
the belt clip from the
handset.
.