Status Light - AT&T TL7000 User Manual

Getting started
Ring detector installation

STATUS light

•
•
ON/OFF
button
STATUS light
•
•
•
•
•
Press the ALERT ON/OFF button
on the lifter to turn to the ring
detector on or off. The STATUS light
is blue if the ring detector is turned
on. The STATUS light is red if the ring
detector is turned off.
If you turn the ring detector off, the
incoming alert tone is not sent to the
headset(s). The ON/OFF light on the
headset still flashes when there is an
incoming call.
The light is blue when the lifter is not
in use and the ring detector is turned
on.
The light is red when the lifter is not
in use and the ring detector is turned
off.
The light quickly flashes in blue when
the ring detector senses an incoming
call.
The light flashes slowly in blue
when the lifter is in use and the ring
detector is turned on.
The light flashes slowly in red when
the lifter is in use and the ring
detector is turned off.
13