Other Functions; Turning The Clock Display On Or Off; Using The Aux Source; Selecting Aux As The Source - Pioneer DEH-P1Y Operation Manual

Other Functions

Turning the clock display
on or off
You can turn the clock display on or off.
% Press CLOCK to turn the clock display
on or off.
Each press of CLOCK turns the clock display
on or off.
# The clock display disappears temporarily
when you perform other operations, but the clock
display appears again after 6 seconds.
Note
Even when the sources are off, the clock display
appears on the display. Pressing CLOCK turns
the clock display on or off.

Using the AUX source

An IP-BUS-RCA Interconnector such as the
CD-RB20/CD-RB10 (sold separately) lets you
connect this unit to auxiliary equipment fea-
turing RCA output. For more details, refer to
the IP-BUS-RCA Interconnector owners man-
ual.

Selecting AUX as the source

% Press SOURCE to select AUX as the
source.
Press SOURCE until AUX appears in the dis-
play.
# If the auxiliary setting is not turned on, AUX
cannot be selected. For more details, see Switch-
ing the auxiliary setting on page 50.

Setting the AUX title

The title displayed for the AUX source can be
changed.
1 After you have selected AUX as the
source, use Multi-Control and select
FUNCTION to display TITLE.
2 Press DISPLAY to select the desired
character type.
Press DISPLAY repeatedly to switch between
the following character types:
Alphabet (upper case)Alphabet (lower case)
European letters, such as those with ac-
cents (e.g. á, à, ä, ç)Numbers and symbols
3 Push Multi-Control up or down to select
a letter of the alphabet.
Each pushing Multi-Control up will display a
letter of the alphabet in A B C ... X Y Z, num-
bers and symbols in 1 2 3 ... @ # < order. Each
pushing Multi-Control down will display a let-
ter in the reverse order, such as Z Y X ... C B
A.
4 Push Multi-Control right to move the
cursor to the next character position.
When the letter you want is displayed, push
Multi-Control right to move the cursor to the
next position and then select the next letter.
Push Multi-Control left to move backwards in
the display.
5 Move the cursor to the last position by
pushing Multi-Control right after entering
the title.
When you push Multi-Control right one more
time, the entered title is stored in memory.
6 Press BAND to return to the playback
display.
Section
12
53
En