8. TECHNICAL INFORMATION..................14 FOR PERFECT RESULTS Thank you for choosing this AEG product. We have created it to give you impeccable performance for many years, with innovative technologies that help make life simpler features you might not find on ordinary appliances. Please spend a few minutes reading to get the very best from it.
ENGLISH SAFETY INFORMATION Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible if an incorrect installation and use causes injuries and damages. Always keep the instructions with the appliance for future reference.
Do not use water spray and steam to clean the • appliance. Clean the appliance with a moist soft cloth. Only use • neutral detergents. Do not use abrasive products, abrasive cleaning pads, solvents or metal objects. Do not store explosive substances such as aerosol •...
Page 5
ENGLISH 2.3 Use • Before maintenance, deactivate the appliance and disconnect the mains WARNING! plug from the mains socket. Risk of injury, burns, • This appliance contains hydrocarbons electrical shock or fire. in the cooling unit. Only a qualified person must do the maintenance and •...
3. OPERATION 3.1 Control panel ON/OFF button Bottom compartment temperature colder button Top compartment temperature colder button Bottom compartment temperature warmer button Top compartment temperature warmer button Display Mode button OK button A) Fridge compartment indicator It is possible to change predefined...
ENGLISH 3.4 Switching on the fridge few seconds. Then show again the set temperature. To switch on the fridge it is enough to The alarm indicator continues to flash press the fridge temperature regulator. until the normal conditions are restored. To switch on the fridge in the other way: 3.8 COOLMATIC function 1.
The DYNAMICAIR indicator is shown. audible alarm sounds. Press OK to switch off the sound and terminate the function. The activation of the It is possible to deactivate the function at DYNAMICAIR function any time during the countdown by...
ENGLISH 4.1 Initial power on When the freezing process is completed, return to the required temperature (see CAUTION! "FROSTMATIC Function"). Before inserting the power In this condition, the plug in to the outlet and refrigerator compartment switching on the cabinet for temperature might drop the first time, leave the below 0°C.
5. CARE AND CLEANING WARNING! To make sure fully Refer to Safety chapters. functionality of the FreshBox compartment the lowest shelf and cover plates must 5.1 Cleaning the interior be put back in their original Before using the appliance for the first position after cleaning.
ENGLISH 6. TROUBLESHOOTING WARNING! Refer to Safety chapters. 6.1 What to do if... Problem Possible cause Solution The appliance is noisy. The appliance is not sup- Check if the appliance stands ported properly. stable. Audible or visual alarm is The cabinet has been re- Refer to "Door Open cently switched on or the Alarm"or "High Temperature...
Page 12
Problem Possible cause Solution The compressor does not This is normal, no error has The compressor starts after a start immediately after occurred. period of time. pressing the FROSTMATIC, or after changing the tem- perature. The compressor does not...
ENGLISH Only service is allowed to replace the If the advice does not lead lighting device. Contact your After Sales to the desired result, contact Service. the nearest Authorised Service Centre. 6.2 Replacing the lamp The appliance is equipped with a longlife LED interior light.
The appliance is supplied with a 13 amp should be placed in the drawer before fuse (B). In the event of having to change the appliance is turned on. the fuse in the plug supplied, a 13 amp 1. Open the drawer.