Manual - CITROEN C4 PICASSO Handbook

Repositioning a seat
F If necessary, straighten the continuity
nd
panels for the seats in the 2
them in place.
F Raise the backrest and push it rearwards
until it locks in position.
Before operating the rear seats, check
that the outer rear seat belts are not
loose, to avoid damaging them. The
centre belt must be stowed. Fix the
tongues of the three belts to their
anchorage points.
Continuity panels
Each seat has a continuity panel at the bottom
row and lock of the backrest, that once unfolded:
- provides a continuous load surface in the
boot, whatever the position of the seats,
- avoids objects sliding under the seats in
row.
the 2 nd
These continuity panels are not
designed to support a weight greater
than 30 kg.
Releasing / locking the continuity panels
F Before unfolding the continuity panels,
check that the seats in the 2
nd
back.
F Slide the continuity panel latch upwards to
release.
F Straighten the continuity panel, then slide
the latch downwards to lock it.
Comfort
3
row are fully
83