Page 1
DIGITAL DOOR VIEWER USER MANUAL The following rights are reserved: Any changes, without previous notice, made to either the functionality or appearance of this product will invalidate the guarantee. Use of this product in any environment or in any way other than specified here will also invalidate the guarantee.
Attention: 1.Please read this user manual carefully before using our product. 2.Never attempt to repair or modify this product or its accessories by yourself, to avoid injury and invalidating guarantee! Any accidental factor such as being struck by lightning or any incorrect operation could cause a memory loss on the SD card.
Installation instructions 1.Replace the existing door viewer or drill a 14mm hole in the door at the required height, insert the camera from the outside . Making sure the washer is fitted between the camera and the door. Ensure the bell push is at the bottom and adjust so that the camera is perpendicular to the horizon.
Installation and replacement of batteries: Installation: 1.Slide the lid upwards and open outwards as shown in diagram. 2.Put in the batteries according to the “+” “-” sign on the lid. 3.Take the reverse steps to close the lid. Attention: 1.DO NOT force when opening and closing the lid to avoid damaging the lid.
Operation instruction: Parts specifications: The front part of the screen case: Button functions: : multi function basic function Upward shift Downward shift Menu Left shift only in menu setting selection key to replay mode in normal use. Right shift only in menu setting start shooting key in normal use Power button Back side of screen case 7.TF card socket...
Operation instructions: Parts specification: Camera front view Camera side view 1.Camera 2. Door bell button 3. Data wire Menu interface instruction: 00000 2011-01-01...
Page 7
No : Icon Function photo shooting mode Mode directing icons Video shooting mode Playback mode for photos or videos This icon shows the TF card is TF card plugged-in icon plugged in and is recognized by the system. This icon shows the normal door bell mode Door bell state icon This icon shows the DND(do not...
Page 8
press menu button to enter. Select “ setting the date” key, press the menu button to enter and use “ ”key to select the digit to be set and use“ ”to adjust the number. If you want to add date and time information on the photos, you can choose the “time &...
Page 9
switch into video taking mode and press“ ”to start shooting, one more press of “ ”will end the video taking. All videos taken have no sound. Operation: Replay and edit of the stored photos/videos The stored photos and videos can be played on this product, and can also be deleted or edited.
If you choose the Factory reset option, all the settings will be reset to the original state. All the user settings will be cleared. Be cautious! Infrared function This product has an infrared function, which enables user to observe outside images at night or in dark areas. Due to the image-forming principle, all images shown on the screen are black and white form, which is normal.