Dodge 2014 RAM 1500 Owner's Manual page 186

184 UNDERSTANDING YOUR INSTRUMENT PANEL
Vehicles Equipped With Passive Entry
1. Without pressing the brake pedal, press the ENGINE
START/STOP button and cycle the ignition to the
ON/RUN position (do not start the engine.)
2. Press and release the DOWN arrow button to scroll
downward through the main menu to "Vehicle Info".
3. Press and release the RIGHT arrow button to access
the "Fuel Filter Life" screen.
4. Press and release the DOWN arrow button to select
"Reset", then press and release the Right arrow button
to select reset of the Fuel Filter Life to 100%.
5. Press and release the Up arrow button to exit the EVIC
screen.
Vehicles Not Equipped With Passive Entry
1. Without pressing the brake pedal, cycle the ignition to
the ON/RUN position (do not start the engine.)
2. Press and release the DOWN arrow button to scroll
downward through the main menu to "Vehicle Info".
3. Press and release the RIGHT arrow button to access
the "Fuel Filter Life" screen.
4. Press and release the DOWN arrow button to select
"Reset", then press and release the Right arrow button
to select reset of the Fuel Filter Life to 100%.
5. Press and release the Up arrow button to exit the EVIC
screen.
NOTE: If the indicator message illuminates when you
start the vehicle, the Fuel Filter indicator system did not
reset. If necessary, repeat this procedure.
Oil Life Reset
Your vehicle is equipped with an engine oil change
indicator system. The "Oil Change Required" message
will flash in the EVIC display for approximately 10
seconds after a single chime has sounded, to indicate the