3.1.3 Asynchronous Operation Mode Concept
The Locosto can operate in either:
• The traditional synchronous mode with the 26MHz system clock synchronized on the base station
• A special asynchronous mode (XO concept).
In the asynchronous mode the 26MHz clock input is not synchronized with the base station; the
residual frequency offset is compensated in the digital signal processing domain. This processing
includes frequency and timing compensation of the baseband and voiceband signals.
3.1.4 Receiver Antenna Bar Display
Copyright © 2008 LG Electronics. Inc. All right reserved.
Only for training and service purposes
Antenna Bar
Over -92 ± 2 (dBm)
( -93 〜 -100 ) ± 2 (dBm)
skip
( -101 〜 -103) ± 2 (dBm)
( -104 〜 -105) ± 2 (dBm)
Less -106 ± 2 (dBm)
- 21 -
3. HW Circuit Description
RSSI Range (dBm)
LGE Internal Use Only