Functions And Settings - Pulse TU-201 Instruction Manual

Change Between DAB & FM Modes:
1. To change receiving mode from DAB to FM, simply press the MODE button.
2. The LCD screen will display the current selected mode.
Tuning In DAB Mode:
Initial DAB Tuning.
1. To carry out initial DAB tuning press & hold the Jog Wheel on the front of the unit for 2 seconds, or
press the AUTO‐SCAN button on the remote.
2. The AUTO‐SCAN function will search and store all available DAB radio stations.
3. To store any new DAB stations, repeat step 1 of initial DAB tuning.
Changing between DAB Stations.
1. To change between DAB stations turn the Jog Wheel left/right or press the DOWN or UP buttons on
the remote, this will scroll through the stored DAB stations.
2. Once desired station is displayed, either, press the Jog Wheel or the ENTER button on the remote.
3. The DAB station will now tune itself in for listening.
Note: If signal is too weak "Not available" will be displayed on the LCD screen.
Tuning In FM Mode:
Manual Tuning.
1. To manually tune / search for a desired radio station you can turn the Jog Wheel left or right to
decrease or increase the reception frequency by 0.05MHz.
2. Alternatively you can press the DOWN or UP buttons to decrease or increase the reception frequency
by 0.05MHz.
Auto Tuning.
1. To automatically tune to the next available radio station press & hold either the DOWN or UP
buttons.
2. The unit will then automatically search for the next available station.
Auto Scan.
1. This function will automatically tune into and store the available FM radio stations into the FM List
button.
2. To activate the Auto Scan function press & hold the Jog Wheel on the front of the unit for 2 seconds,
or press the AUTO‐SCAN button on the remote.
3. To select a stored radio station press the FM List button then turn the Jog Wheel left/right or press
the DOWN or UP buttons to scroll through the stored FM stations.
4. Once desired station is displayed, either, press the Jog Wheel or the ENTER button
Functions & Settings
6