NETGEAR Nighthawk X8 AC5300 Tri-Band User Manual page 66

Network Settings
The router comes ready for WiFi, Ethernet, and USB connections. You can customize the router's network settings. We
recommend that you install the router and connect it to the Internet before you change its network settings.
This chapter includes the following sections:
• View or Change WAN Settings
• Set Up a Default DMZ Server
• Set Up Ethernet Port Aggregation
• Change the LAN TCP/IP Settings
• Change the Router's Device Name
• Specify the IP Addresses That the Router Assigns
• Disable the DHCP Server Feature in the Router
• Manage Reserved LAN IP Addresses
• Custom Static Routes
• Set Up a Bridge for a Port Group or VLAN Tag Group
• Use the WPS Wizard for WiFi Connections
• Specify Basic WiFi Settings
• Set Up a Guest WiFi Network
• Control the WiFi Radios
• Set Up a WiFi Schedule
• Specify WPS Settings
• Use the Router as a WiFi Access Point
• Use the Router in Bridge Mode
on page 67
on page 68
on page 69
on page 71
on page 73
on page 76
on page 78
on page 84
on page 85
on page 89
on page 91
on page 92
on page 93
on page 94
on page 97
on page 74
on page 75
on page 81
66
6