DF45070M Rev 1
19/11/04
Lift the basket from the rest position and
lower into the cooking position in the hot
oil.
Lower the handle by pulling back the
handle release button and lower handle into
its recess.
Assembly/Disassembly
sequence
The fryer has to be disassembled and
assembled following this procedure.
• Open the lid and remove.
• Remove the basket.
• Lift out the tank.
• Pull out the pod control.
Assembly is the reverse of the above
process.
11:01 AM
Page 5
Removal of the pod
1 Lift up the fryer body at the front as
2 Replace by locating the pod in the
3 Once the pod is in place route the mains
Replacing the bowl
replacing.
5
shown and pull out the pod.
guides and push fully in.
cable to the side or out of the back,
whichever is convenient.
Ensure bowl contacts are dry before