Chin Strap Micrometric Buckle - Shark Vancore Manual

A
C
aDViSe For USe
1/ Putting on the helmet
Once the chin strap is released, you have to
take hold of the two sections by the buckles
and hold them slightly apart to facilitate the
passage of your head. While carrying out this
movement, you are advised to keep the two
sections of the chin strap apart with your
thumbs so that they are properly positioned.
1 - Put the helmet first against your neck (A).
2 - Then switch towards the front (B).

cHin StraP MicroMetric bUckle

B
D
to remove, reverse operations
Position the protective parts of the chin strap
buckle correctly and fasten it in accordance
with the recommendations that are appro-
priate to the versions and country.
Check that the tension and therefore the posi-
tioning of the helmet are correct for all posi-
tions.
2/ removing the helmet
Release the chin strap; hold the two sections
slightly apart as for putting the helmet on and
remove the helmet (D).
7