Advertisement
Touch Pad (Basic Operation)
Basic Operation (continued)
Function
Double-Tapping/
Double-Clicking
Draggling
Handling
Do not obstruct the optical sensor (light receiving part) in order to extend the life of the
backlight.
When pressing Fn + F12 , the brightness of the backlight will be switched by 4 steps.
Wipe the keyboard with a soft cloth, after applying water or detergent diluted with water
to the soft cloth and firmly wringing out excess water.
CAUTION
Do not use benzene, thinner, or rubbing alcohol. Doing so may adversely affect the
surface, e.g., discoloration. In addition, do not use commercially-available household
cleaners and cosmetics, as they may contain components harmful to the surface.
Do not directly add or spray water or detergent. If liquid enters the inside of the key-
board, it may cause it to work improperly or be damaged.
Under high-temperature conditions, the brightness of the backlight may be diminished
in order to protect the LEDs.
Handling the Touch Pad
Do not place any object on the work surface or press down forcefully with sharp-
pointed objects (e.g., nails), hard objects that can leave marks (e.g., pencils and
ball point pens).
Do not allow things that could dirty the touch pad, such as oil. The cursor may not
work properly in such cases.
When the touch pad becomes dirty:
Wipe to remove dirty areas by using a dry soft cloth such as gauze or a soft cloth
first applied with detergent diluted with water and then thoroughly wrung.
Do not use benzene, thinner, or disinfectant-type alcohol.
Touch Pad Operation
Two quick taps, but on the sec-
ond tap leaving your finger
down (applying pressure) and
moving it on the work surface.
or
or
While holding down the button,
moving your finger on the work
surface.
Advertisement
