Standard Signal Mode Table - Samsung S19E310HY User Manual

10
Specifications

10.6 Standard Signal Mode Table

This product can be set to only one resolution for each screen size to obtain the optimum picture

quality due to the nature of the panel. Therefore, a resolution other than the specified resolution
may degrade the picture quality. To avoid this, it is recommended that you select the optimum
resolution specified for the screen size of your product.
Check the frequency when you exchange a CDT monitor (connected to a PC) for an LCD monitor.

If the LCD monitor does not support 85 Hz, change the vertical frequency to 60 Hz using the CDT
monitor before you exchange it with the LCD monitor.
Synchronization
Resolution
If a signal that belongs to the following standard signal modes is transmitted from your PC, the screen will
automatically be adjusted. If the signal transmitted from the PC does not belong to the standard signal
modes, the screen may be blank even though the power LED turns on. In such a case, change the
settings according to the following table by referring to the graphics card user manual.
S19E310HY
Resolution
IBM, 720 x 400
VESA, 640 x 480
MAC, 640 x 480
VESA, 640 x 480
VESA, 640 x 480
VESA, 800 x 600
VESA, 800 x 600
VESA, 800 x 600
VESA, 800 x 600
MAC, 832 x 624
Model Name
Horizontal Frequency
Vertical Frequency
Optimum Resolution
Maximum Resolution
Horizontal
Frequency
(kHz)
31.469
31.469
35.000
37.861
37.500
35.156
37.879
48.077
46.875
49.726
S22E310HY /
S22E310H /
S24E310HL /
S27E310H
30 – 81 kHz
56 – 75 Hz
1920 x 1080 @ 60 Hz
1920 x 1080 @ 60 Hz
Vertical
Pixel Clock
Frequency
(MHz)
(Hz)
70.087 28.322
59.940 25.175
66.667 30.240
72.809 31.500
75.000 31.500
56.250 36.000
60.317 40.000
72.188 50.000
75.000 49.500
74.551 57.284
S19E310HY
1366 x 768 @ 60 Hz
1366 x 768 @ 60 Hz
Sync Polarity
(H/V)
-/+
-/-
-/-
-/-
-/-
+/+
+/+
+/+
+/+
-/-
86
10 Specifications