Indication For Flash Memory; Indication For Ipod Mode - Alpine CDE-154BT Operating Instructions Manual

• Mechanism error.
1 Press the  button and eject the CD.
If not ejecting, consult your Alpine dealer.
2 When the error indication remains after ejecting, press the 
button again.
If the error indication still does not turn off after pressing the 
button for a few times, consult your Alpine dealer.
• When "ERROR" is displayed:
If the disc cannot be ejected by pressing , press the RESET switch
(refer to "Initial System Start-Up" on page 10) and press  again.
If the disc still cannot be ejected, consult your Alpine dealer.
• A copy-protected WMA file was played back.
– You can only play back non-copy-protected files.
• A sampling rate/bit rate not supported by the unit is used.
– Use a sampling rate/bit rate that is supported by the unit.
NO SUPPORT
• An AAC format disc is inserted.
– Change to a disc of a supported format.

Indication for Flash Memory

• Communication error or other error.
– You can solve the problem by switching the source, turning ACC
off/on, or turning power off/on.
• Communication error.
– You can solve the problem by switching the source, turning ACC
off/on, or turning power off/on.
• Abnormal current is run to the USB Flash Memory device.
– You can solve the problem by turning ACC off/on, or turning
power off/on.
NO USB DEVICE
• A Flash Memory is not connected.
– Make sure the Flash Memory device is correctly connected.
NO FILE
• No song (file) is stored in the Flash Memory.
– Connect the Flash Memory device after storing songs (files).
• A sampling rate/bit rate not supported by the unit is used.
– Use a sampling rate/bit rate that is supported by the unit.
• A copy-protected WMA file was played back.
– You can only play back non-copy-protected files.
NO SUPPORT
• Text information that is not recognizable by the unit is being used.
– Change the text information to text that is supported by the unit.
DEVICE ERROR
• An unsupported USB device is connected.
– Change other Flash Memory.

Indication for iPod Mode

• There are no songs in the iPod/iPhone.
– Download songs to the iPod/iPhone.
• Communication error or boot error, etc.
– You can solve the problem by switching the source, turning power
off/on, or turning ACC off/on.
• The iPod/iPhone version is too low.
– Update the iPod/iPhone version.
• The iPod/iPhone is not verified.
– You can solve the problem by resetting the iPod/iPhone.
• Abnormal current is run to the iPod/iPhone.
– You can solve the problem by reconnecting the iPod/iPhone,
turning ACC off/on, or turning power off/on.
NO USB DEVICE
• The iPod/iPhone is not connected.
– Make sure the iPod/iPhone is correctly connected and the cable is
not bent excessively.
43
-EN