Operating Controls; Operation; Ice Crushing - Morphy Richards Cocktail blender Owner's Manual

48575 Rev 1 26/8/04

Operating controls

The cocktail blender control switch has
the following settings. Pulse, off and 5
speeds. Ice crush button.
The speed can be adjusted whilst the
cocktail blender is in use.
Using the pulse setting allows greater
control over the texture of the drink or food
produced. It is only intended to be used for
short 'bursts' of blending.

Operation

1 Ensure the cocktail blender base unit fi
is unplugged from the mains.
2 Place the cocktail
blender jug onto the
base unit and drop into
place. Ensure the jug is
securely in place.
3 Place the ingredients in
the cocktail blender.
(Please see page 5 for
hints on blending food).
4 Place the lid ¤ onto the
cocktail blender.
1:55 PM Page 4
Ice crush
5 Then put the filler cap ⁄ into position.
6 Plug in the cocktail blender and turn the
control switch fl to either pulse or speed
1 to speed 5 depending on the desired
consistency. Always operate the cocktail
blender with the lid in place.
7 Never operate the cocktail blender with
more than 1 litre of liquid or when empty.
• The filler cap can also be used as a spirit
measure when making cocktails. Each
mark is 25ml.

Ice crushing

This product has a special ice crushing
function.
1 Put the ice (straight from the freezer) into
the stainless steel jug.
2 Press the ice crush button and hold for
about 20 seconds or until all the ice is
crushed.
4