Troubleshooting - Casio QV-200 Owner's Manual

Using the Camera with a Connected Device
Computer (Video Capture)
You can use the special video cable that comes with the camera to
connect directly to the VIDEO IN terminal of a personal computer
equipped with video capture capabilities.
To transfer camera images to a personal computer (video
capture)
1. Use the special video cable that comes with the camera to connect
to the VIDEO IN terminal of the computer.
2. Enter the camera Playback Mode and display the image you want
to send.
3. Perform the required operation on the computer.
• Consult the owner's guide that comes with the computer or its video
capture board for details about how to set up to capture images.
Important!
• With this configuration, you cannot send images from the personal
computer to the camera.
• The camera can be connected directly to a personal computer or
video capture board that is equipped with a VIDEO IN terminal
(RCA pin jack). It cannot be connected directly to an S-VIDEO ter-
minal.
Symptom Probable Cause
Poor LCD image I n c o r r e c t N O R M A L /
focus MACRO switch setting
Poor color and Indoor fluorescent lighting
brightness when
indoors
Recorded image Strong direct or reflected
h a s g r e e n i s h sunlight
tinge.
Color of 1. Reflection from sun-
recorded image light or light from an-
is strange. other source
2. Difference between
R e c o r d M o d e a n d
Playback Mode char-
acteristics.
No +/– button Button operation during
operation during page change
multi-page dis-
play
All pages do not Protected memory pages
appear during are hidden.
auto play.
VIDEO
65
Action
Use NORMAL for scen-
ery and group photos,
and MACRO for close-
ups (page 24).
Shoot under incandes-
cent or other non-fluores-
cent lighting (page 21).
Change aperture setting
to [●]. Note that this con-
dition is due to CCD char-
acteristics, and does not
indicate camera malfunc-
tion.
1. Reorient the camera
so that light is not shin-
ing directly into lens.
2. This difference does
not indicate a problem
or malfunction.
Wait until an image is on
the LCD before perform-
ing a button operation.
Unhide protected memo-
ry pages (page 52).
67

Troubleshooting

Reference
Symptom Probable Cause
No power 1. Batteries not loaded
correctly.
2. Dead batteries
3. Wrong AC adaptor
Sudden power 1. O p e r a t i o n o f A u t o
failure Power Off
2. Low battery power
Use of manganese
batteries.
indicator Power will automatically
on LCD turn off shortly.
N o r e c o r d i n g Function switch sets to
w h e n s h u t t e r PLAY.
b u t t o n i s
pressed
P o w e r f a i l u r e Low battery power
during self-timer
operation
● indicator on Over exposure
LCD
○ indicator on Under exposure
LCD
66
Reference
Symptom Probable Cause
Camera is con- 1. Function switch set to
nected to a TV, REC
but LCD monitor 2. Incorrect camera-TV
contents do not connection
appear on TV
screen.
3. Wrong TV set up
Some images Protected memory pages
are missing. are hidden.
C a n n o t u s e Protected memory pages
multi-page dis- are hidden.
play.
Cannot protect Protected memory pages
memory pages. are hidden.
ALL DATA IS Protected memory pages
PROTECTED! are hidden.
stays on monitor
and images do
not appear.
68
Action
1. Correctly load batter-
ies (page 13).
2. Replace batteries with
new ones (page 13).
3. U s e o n l y r e c o m -
mended AC adaptor .
1. Turn power back on.
2. Replace batteries with
new ones (page 13).
Replace manganese
batteries with alkaline
batteries.
Replace all four batteries
with a set of new ones
(page 13).
Set function switch to
REC.
Replace batteries (page
13).
Change aperture switch
setting to [●] (page 26).
Change aperture switch
setting to [○] (page 26).
Troubleshooting
Action
1. Set function switch to
PLAY (page 31).
2. Connect correctly us-
ing the special video
cable that comes with
the camera (page 32).
3. Set up the TV cor-
rectly.
Unhide protected memo-
ry pages by holding down
[–] while turning power on
(page 52).
Unhide protected memo-
ry pages by holding down
[–] while turning power on
(page 52).
Unhide protected memo-
ry pages by holding down
[–] while turning power on
(page 52).
Unhide protected memo-
ry pages by holding down
[–] while turning power on
(page 52).