Configuring Audio Recording - Gigabyte GA-Z170X-Gaming 7 User Manual

6-2-4 Configuring Audio Recording
You can record the sound from the microphone or Line in device or record the sound from your computer.
1. Configuring your microphone:
Step 1:
Connect your microphone to the Mic in jack on the back
panel or the Mic in jack on the front panel.
Note: The microphone functions on the front panel and
back panel cannot be used at the same time.
Open the Sound Blaster Recon3Di control panel
and go to the CRYSTALVOICE page. Make sure your
microphone is correctly connected.
Step 2:
To hear the sound being recorded during the recording
process, it is recommended that you set the Mic
volume at a middle level. Do not mute the recording
volume, or you'll not be able to record the sound.
To raise the recording and playback volume for the
microphone, use the Mic Boost slider and set the
microphone boost level.
2. Configuring your Line in device:
Step 1:
Open the Sound Blaster Recon3Di control panel
and go to the MIXER page. In the Recording section,
click the Input Device icon and select Rear Line-In.
Later you can use the Line-In slider to set the volume.
- 117 - Appendix