Canon powershot elph 170 is User Manual page 186

ç Contents
Cannot magnify!/Cannot rotate/Cannot modify image/Cannot
modify/Cannot assign to category/Unselectable image.
• The following functions may be unavailable for images that were renamed
or already edited on a computer, or images shot with another camera.
Note that starred (*) functions are not available for movies.
Magnify* (= 116), Rotate*
168), and Photobook Set-up*
(=
Exceeded selection limit
• More than 998 images were selected for Print List
Set-up (= 172). Choose 998 images or less.
• Print List (= 168) or Photobook Set-up
saved correctly. Reduce the number of selected images and try again.
• You attempted to choose more than 500 images in Protect
Erase (= 122), Print List
Naming error!
• The folder could not be created or images could not be recorded,
because the highest supported folder number (999) for storing images
on the card has been reached and the highest supported image number
(9999) for images in folders has been reached. On the [3] tab, change
[File Numbering] to [Auto Reset]
(= 138).
Lens Error
• This error may occur if the lens is held while it is moving, or when the
camera is used in dusty or sandy locations.
• Frequent display of this error message may indicate camera damage. In
this case, contact a Canon Customer Support Help Desk.
A camera error was detected (error number)
• If this error message is displayed immediately after a shot, the image may
not have been saved. Switch to Playback mode to check for the image.
• Frequent display of this error message may indicate camera damage.
In this case, write down the error number (Exx) and contact a Canon
Customer Support Help Desk.
ç Chapter Contents
(= 125), Edit* (= 127
(= 172).
(=
(= 168), or Photobook Set-up
(= 141), or format the memory card
– 131), Print List*
(= 168) or Photobook
172) settings could not be
(=
(= 172).
186
119),