Button Descriptions - Panasonic KX-TD816 User Manual

5.2 Before Operating the DECT Portable Station

Button Descriptions

Your PS has the useful function buttons listed below. These buttons make operations simple.
INTERCOM Button: Used to make or
INT'
receive intercom calls.
TALK Button: Used to make, receive or
end calls.
CANCEL Button: Used to end calls, or
C
exit the directory or Function mode.
CLEAR / TRANSFER Button: Used to
clear incorrect digits while entering
CLR
numbers or transfer a call to another
extension.
HOLD Button: Used to place a call on
hold.
FUNCTION Button: Used to enter into
the Function mode or access features
by pressing additional keys.
AUTO / OK Button: Used for System
OK
Speed Dialling and storing programme
changes.
REDIAL Button: Used to redial the last
number dialled.
176
Flexible CO Buttons (F1 through F3):
F1-F3
Used to make or receive an outside call.
A Loop-CO button is already assigned
to F1 button. Pressing this button
seizes an idle line automatically.
F2 and F3 button can be used as the
desired function buttons. (Button
assignment is required.)
If the term is in parentheses like ( Save ),
it means this button has been made into
an "Save" button.
BOOK Button: Used to enter into the
directory mode or select a menu in the
Function mode.
FLASH Button: Used to disconnect a
current call and make another call.
Power Switch: Used to switch the power
ON ( ) or OFF (
Volume Control Button: Used to select
the ringer volume (seven levels, off and
vibration mode) during on-hook or
ringing status, or receiver volume (three
levels) during a conversation. The
volume levels are indicated by the
number of asterisks on the display.
).
DECT Portable Station