Monster Power HTS 5000 Owner's Manual page 31

Home theatre reference powercenter

Hide thumbs Also See for HTS 5000:

Table of Contents

Possible Cause #3

The PowerCenter's power cord is plugged into an outlet on the back of one of your components and the component

is not turned On.

Possible Solution

• Turn on the component.

NOTE: For the best possible performance, plug the PowerCenter into a wall outlet,

not an outlet on another component.

Possible Cause #4

The PowerCenter is defective.

Possible Solution

• Please see page 35 for warranty information.

PROBLEM – PowerCenter is not providing power to the components.

Possible Cause #1

The component is plugged into an outlet programmed as "switched on" or "switched on after delay"

and the PowerCenter has not been turned on.

Possible Solutions

• Press the ON button on the PowerCenter. The components plugged into the PowerCenter"s

outlets programmed as "switched on" should be turned on immediately.

• Press the ON button on the PowerCenter and wait for a few seconds for the components plugged

into the PowerCenter"s outlets programmed as "switched on after delay" to be turned on.

• Or, plug the component into an outlet programmed as "unswitched".

TROUBLESHOOTING (continued)

Table of Contents

Show Quick Links

Table of Contents