Monster Power Professional PowerCenter Pro 2500 Owner's Manual page 17

LIT_PRO2500_manual_G.qxd 11/10/2003 3:39 PM Page 17
NUMBERS REFER TO DRAWING ON PAGE 7
12. Breaker Open: When this LED is on, the thermal circuit breaker has tripped, due to overload, to protect
your equipment. Find the reason for overload, correct it, and press the breaker in to reset.
13. Ultra-High Current PowerLine 200 AC Power Cable: High-density, double-shielded AC Power cord
™
is specially designed to maximize power transfer to ultra-high power components such as amplifiers.
14. Dimmer: This knob controls the flexible MonsterLight; Push On/Push Off, clockwise brighter, counter-clockwise dimmer.
The MonsterLight can be turned on even when the unit is switched off.
15. 12V XLR Lamp Socket: Provides 12 volts (pin 2) to the flexible Monster Light.
16. Numerical Display: Three-character 1-line LED numeric display indicates the AC voltage the unit
is receiving from the wall.
17. Unswitched Convenience Outlets: These outlets provide an easy front panel connection that is "always on, "
even when the PowerCenter is switched off. These outlets provide filtered power.
10