Table of Contents
Advertisement
Cleaning your machine
This section describes the necessary cleaning procedures for your machine.
CAUTION
• Be sure to turn off the power and disconnect the power cord before cleaning the machine.
• Do not use tissue paper, paper towels, or similar materials for cleaning; they can stick to the
components or generate static charges. Use a soft cloth to avoid scratching the components.
• Never use volatile liquids such as thinners, benzene, acetone, or any other chemical cleaner to
clean the interior of the machine; these can damage the machine's components.
Cleaning the exterior
Wipe the machine's exterior with a clean, soft, lint-free cloth moistened with water or diluted
dishwashing liquid.
Cleaning the scanning area
Wipe the platen glass A and white area B with a
clean, soft, lint-free cloth moistened with water,
then wipe with a clean, soft, dry, lint-free cloth.
Cleaning the roller
Clean the roller when envelopes do not feed correctly.
Follow this procedure to perform roller cleaning:
1
Remove any print media from the multi-purpose tray.
2
Press [Menu] repeatedly until <MAINTENANCE> is displayed.
3
2 ] or [3 3 3
2
Use [2 2
4
Press [OK].
5
When cleaning has finished, repeat this procedure twice more. Then load A4- or
letter-size plain paper and repeat this procedure a further three times from step 2.
Chapter 9
3 ] to select <ROLLER CLEANING>.
A
B
9-9
Maintenance
9
Advertisement
Table of Contents
