Yaesu MARK-V FT-100MP Operating Manual page 8

A
CCESSORIES
YH-77STA
L
IGHTWEIGHT
Dual samarium-cobalt transducers with sensitivity
of 103dB/mW (±2dB, @1 kHz, 35 Ohms) provide the
perfect match for the MARK-V FT-1000MP Field. Dur-
ing dual receive with the YH-77STA, one receiver can
be monitored in each ear, allowing easy separation of
the signals from the two receivers (or the audio can be
mixed, if desired).
DVS-2
D V R
IGITAL OICE
Serving as either a continuous receiver recorder for
instant pushbutton playback, or microphone audio re-
corder for multiple on-air playback, the DVS-2 applies
the advantages of random-access solid-state digital
memory to serious communications. All data is stored
electronically, with no moving parts except your finger
and the pushbutton. More information is on page 81.
FH-1
R C
EMOTE ONTROL
The FH-1 is a remote-control accessory designed
to enhance the operating flexibility of your MARK-V
FT-1000MP Field. The FH-1 permits several remote
control features, which may be selected via Menu pro-
gramming. More information is on page 76.
Page 6
& O
PTIONS
A
VAILABLE
S H
TEREO EADPHONES
ECORDER
K
EYPAD
O
PTIONS
IF Crystal Filter Options
Five optional crystal filters may be installed in the
Main Receiver of the MARK-V FT-1000MP Field, and
one in the Sub Receiver.
Optional Main Receiver Filters
8.2 MHz (2nd IF)
YF-114SN: 2.0-kHz BW (for all modes except FM)
YF-114CN: 250-Hz BW (for all except AM & FM)
455 kHz (3rd IF)
YF-110SN: 2.0-kHz BW (for all modes except FM)
YF-115C Collins Mechanical Filter: 500-Hz BW (for CW
& RTTY)
YF-110CN: 250-Hz BW (for CW only)
Optional Sub Receiver Filter
455 kHz (2nd IF)
YF-115C: Collins Mechanical Filter 500-Hz BW (for CW
& RTTY)
Availability of accessories may vary: some accesso-
ries are supplied as standard per local regulations and
requirements, others may be unavailable in some re-
gions. Check with your Yaesu dealer for additions to
the above list.
O M
PERATING ANUAL