Table of Contents
Advertisement
This appliance has been specifically tested and design certified for installation only
in a solid-fuel burning fireplace including factory-built UL127 fireplaces and masonry
fireplaces, or in a listed ventless firebox (see below).
Exception: DO NOT install this appliance in a factory-built fireplace that includes
instructions stating that it has not been tested or should not be used with unvented
gas logs.
Use manufacturer's installation and clearance requirements as defined in their manual.
The EYF Series unvented room heater is approved for installation into the following unvented fireplaces:
The EYF Series unvented room heater may also be installed into a Ventless Firebox Enclosure for Gas Fired Decorative
Type Unvented Room Heaters per ANSI Z21.91b.2004, as long as firebox hearth dimensions meet the minimum hearth
dimensions shown below.
Model
EYF18
EYF24 w/EYF24-(R,F)
EYF24 w/EYF30-R
65D1009
GCUF(32,36,42) and VFR(32,36,42) Series Fireboxes
A
B
C
1
25"
13"
17
1
29"
13"
19
1
33"
13"
25
Figure 2 - Hearth Minimum Dimension for Solid Fuel Burning
Fireplaces and UL127 Factory Built Fireplaces
FIREPLACE AND HEARTH DIMENSIONS
D
/
"
17"
2
/
"
17"
2
D
/
"
17"
4
C
A
B
9
Hide quick links:
Advertisement
Table of Contents
