Messages; Tape Deck - Sony MHC-RV8 Operating Instructions Manual

Problems and remedies (continued)

Tape Deck

The tape does not record.
• The tab has been removed from the cassette,
cover the broken tab with adhesive tape.
• The tape has reeled to the end.
The tape does not record nor play or there is a
decrease in sound level.
• The heads are dirty. (See "Cleaning the tape
heads" on page 36).
• The record/playback heads are magnetized. (See
"Demagnetizing the tape heads" on page 36).
The tape does not erase completely.
• The record/playback heads are magnetized. (See
"Demagnetizing the tape heads" on page 36).
There is excessive wow or flutter, or the sound
drops out.
• The capstans or pinch rollers are dirty. (See
"Cleaning the tape heads" on page 36).
Noise increases or the high frequencies are
erased.
• The record/playback heads are magnetized. (See
"Demagnetizing the tape heads" on page 36).
Tuner
There is severe hum or noise ("TUNED" or
"STEREO" flashes in the display).
• Adjust the antenna.
• The signal is too weak. Connect an external
antenna.
A stereo FM program cannot be received in
stereo.
• Press FM MODE so that "MONO" disappears.
If other troubles not described above
occur, reset the system as follows:
1
Press x, ENTER and ?/1 at the same
time.
2
Unplug the power cord.
3
Plug the power cord back in.
4
Press ?/1 to turn on the power.
The unit is reset to factory settings. All the
settings are cleared.
GB
34

Messages

VIDEO CD/CD
CANNOT USE
You press an incorrect button.
CANNOT EDIT
• You press b/B/v/V during Karaoke mode.
• You press CINEMA SPACE during Karaoke
mode.
• You press EDIT before CD is ready.
CD NO STEP
You have cleared all the tracks you programmed.
OVER
You have reached the end of the CD or MP3 files.
Press m.
PUSH STOP
You press PLAY MODE during play.
STEP FULL
You tried to program 26 or more tracks (steps).
TOC READING
The system is reading the TOC information of the
disc. Some buttons are not available.
MHC-RV8 4-240-082-11 (1)