Table of Contents
Advertisement
Adjusting the logo display
98
Video Switching
3
1 Select [Logo Source], and confirm; 2 select the logo file from the list,
and confirm.
1
Logo Source
None
None
Clip
0%
B aaaaaaaa.tif
Gain
50
bbbbbbbb.tif
Density
100%
ccccccccc.bmp
Location
dddddddd.bmp
The image is inserted in both the PGM viewer and PVW viewer.
Notes
• By selecting a logo file from the list, it always appears in the program
output video. If you do not want to show the logo, select [None].
• File information display
By pressing the t button on the jog roller or the t key on the keyboard
while a logo file is selected, you can display information on the logo file
and a thumbnail, as shown below, for as long as you hold down the button
or key.
4
Press the MENU button to close the menu.
Adjust the parameters for logo insertion, and set the logo position.
1
Show the logo.
For details of the operation, see "Showing a logo in the video" (page 97).
2
Press the MENU button.
3
In the top menu, select [Logo].
4
In the submenu, set the following adjustment items.
Adjusting the outline of the logo
1 Select one of [Clip], [Gain], and [Density], and confirm; 2 adjust the
slider.
1
Logo Source
None
Clip
0%
Gain
50
Density
100%
Location
2
2
Advertisement
Table of Contents
