Toshiba e-STUDIO200L Service Manual page 226

(7) Disconnect 1 connector. Release the latches
and take off the 2nd transport sensor.
(8) Disconnect 1 connector. Remove 2 screws
and take off the bypass pickup solenoid and
solenoid arm.
[K] Drawer feeding unit
(1) Take off the drawer.
(2) Remove 1 screw and take off the drawer
feeding unit by sliding it to the front side.
e-STUDIO200L/202L/203L/230/232/233/280/282/283
PAPER FEEDING SYSTEM
Solenoid arm
Drawer feeding unit
© 2004 - 2008 TOSHIBA TEC CORPORATION All rights reserved
9 - 20
2nd transport sensor
Fig. 9-28
Bypass pickup solenoid
Fig. 9-29
Fig. 9-30