Table of Contents
Advertisement
Deep Colour Output
This setting is for selecting whether to use
Deep Colour output when a TV that supports
Deep Colour is connected.
HDMI Audio Output
Select "Off" when connected to an
amplifier/receiver with a DIGITAL AUDIO OUT
terminal.
7.1ch Audio Reformatting
[BD-V]
Surround sound with 6.1 ch or less is
automatically expanded and played back at
7.1 ch.
• If "Off" is selected, sound is played over the
original number of channels. (Note that in
the case of 6.1 ch audio, playback will be at
5.1 ch)
Audio reformatting is enabled in the following
cases:
- When you have selected "PCM" in "Digital
Audio Output". (
84)
- When the audio is Dolby Digital, Dolby
Digital Plus, Dolby TrueHD or LPCM.
Contents Type Flag
If "Automatic" is selected, the optimal method
of playback depending on the TV (e.g.
cinema) will automatically be selected (only
when the TV supports Contents Type Flag).
VIERA Link
Select "Off" when you do not want to use
VIERA Link.
Network
Easy Network Setting
Press [OK] to start Easy Network Setting. (
Network Settings
LAN Connection Mode
Select the LAN connection method.
• When not using wireless LAN (when turning
it off), select "Wired".
Wireless Settings
This allows to set and check the connection
settings of the Wireless router.
Connection Setting
The Wireless router connection wizard will
be displayed.
Double Speed Mode Setting ( 2.4GHz )
When a 2.4 GHz wireless format is used,
this setting sets the connection speed.
• If you connect using the "Double Speed
Mode (40MHz)", 2 channels use the
same frequency band, and there is
consequently a greater risk of reception
interference. This can cause the
connection speed to drop or the
connection to become unstable.
Convenient functions
22)
87
SQT0801
Advertisement
Table of Contents
