Page 1
INSTRUCTION MANUAL Hammer Drill HP2010N 002473 DOUBLE INSULATION WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
AC supply. They Authorized Representative in Europe: are double-insulated in accordance with European Makita International Europe Ltd. Standard and can, therefore, also be used from sockets Michigan Drive, Tongwell, Milton Keynes, Bucks MK15 without earth wire.
GEA001-3 reduce personal injuries. Avoid accidental starting. Ensure the switch is GENERAL SAFETY RULES in the off-position before plugging in. Carrying WARNING! Read all instructions. Failure to follow all power tools with your finger on the switch or instructions listed below may result in electric shock, fire plugging in power tools that have the switch on and/or serious injury.
FUNCTIONAL DESCRIPTION of power tool, taking into account the working conditions and the work to be performed. Use of the power tool for operations different from CAUTION: those intended could result in a hazardous Always be sure that the tool is switched off and •...
CAUTION: CAUTION: Always check the direction of rotation before Always turn the change ring fully to your desired • • operation. mode mark. If you operate the tool with the ring Use the reversing switch only after the tool comes halfway, the tool may be damaged.
Depth gauge Blow-out bulb (optional accessory) 1. Depth gauge 1. Blow-out bulb 2. Clamp screw 002439 002449 The depth gauge is convenient for drilling holes of After drilling the hole, use the blow-out bulb to clean the uniform depth. Loosen the clamp screw and adjust the dust out of the hole.
Only use accessory or attachment for its stated purpose. If you need any assistance for more details regarding these accessories, ask your local Makita Service Center. Tungsten-carbide tipped hammer bit • Hole saw • Blow-out bulb •...
Page 8
Makita Corporation Anjo, Aichi, Japan 883406D221...