DIGITAL SIGNAGE Contents Major features ......................2 Safety Information ....................2 Be sure to understand ....................5 Check the product list ....................6 Proper location for product installation ..............7 Title and function of each part ................8 Support timing for HDMI/DVI ................13 Support timing for Analog RGB ................
DIGITAL SIGNAGE Major features This product has been designed to enable the user ease of use, and display information effectively and conveniently. • TFT LCD Module adopted • Vivid digital color display • OSD control function • Automatic Image control •...
Page 4
DIGITAL SIGNAGE - Do not touch the power cord with wet hands, it may cause electric shock. - Overloaded AC outlets and extension cables are as dangerous as the power cord being damaged, call service engineer for replacement as it may cause electric shock or fire. - Do not use multiple devices in a single power outlet, it may cause overheating or fire.
Page 5
DIGITAL SIGNAGE - In case of Kiosk Model, keep installing the product on the flat location and fixing the wheels not to move itself or fall down. - On Kiosk Model, make sure to turn off the power before connecting cables. - This manual contains general instructions for the display products only so refer to the provided CD-ROM manual and the driver installation manual for the driver installation instructions for touch screen and/or touch screen itself.
DIGITAL SIGNAGE Be sure to understand Image quality of the product CAUSE Due to the nature of LCD's property, Afterimage can occur. Afterimage appears when identical frames / images are displayed continuasly. If displayed for prolonged periods of time this can become permanent. PREVENTION When you display a freeze frame for a long time, lower the brightness and contrast (Brightness, 70/ Contrast, 80).
DIGITAL SIGNAGE Check the product list Please check the following components provided with the product after you open the box. Remote control Power Cord HDMI cable HDMI to DVI Cable (Option) CD Manual &Sheet D-SUB Cable RS232C Cable please check the following components provided with the product after you open the box and contact the dealer if any missing.
DIGITAL SIGNAGE Proper location for 1. Locate the product at least 30cm away from the electric appliance or heating product. 2. The product must be placed at least 10cm away from the wall and ground. product installation 3. Keep the product out of direct ray of light and locate screen not to be reflected by the sunlight.
DIGITAL SIGNAGE Title and function of each part Light Sensor (EM series model only) Remote Control sensor Power indicator The locations may vary depending on model. ✔...
Page 10
DIGITAL SIGNAGE Control Panel Power button ; to turn the power on or off. To move down in OSD menu. Input selection button : to select other connected To move up in OSD menu. device. To move left and control the volume down in OSD menu. Menu button : to display menu or exit from the menu.
Page 11
DIGITAL SIGNAGE Terminal panel - type A 7 89 0! @ SPEAKER OUT PC AUDIO IN PIR SENSOR IN (Option) UPGRADE Port : 8 ! @ * this port is used for upgrade service and not for general users. HDMI IN RS-232C IN DVI IN RS-232C OUT...
Page 12
DIGITAL SIGNAGE Terminal panel - type B 4 2 5 8 9 0 DisplayPort (Option) DVI IN COMPONENT AUDIO-IN (Option) UPGRADE Port : DVI OUT CVBS-IN (Option) * this port is used for upgrade service and not PC-IN CVBS AUDIO-IN (Option) for general users.
Page 13
DIGITAL SIGNAGE Remote control To turn the power on or off. Move up in OSD menu. To move left or control the volume down in OSD menu. To move right or control the volume up in OSD menu. ...
DIGITAL SIGNAGE Support timing for Horizontal frequency Vertical frequency Resolution (KHz) (Hz) HDMI/DVI 480p 640 x 480p 576p 720 x 576p 720p 1280 x 720p 50 / 60 1080i 1920 x 1080i 50 / 60 640 x 480 31.47 59.94 800 x 600 37.88 60.32...
DIGITAL SIGNAGE Support timing for Horizontal frequency Vertical frequency Resolution (KHz) (Hz) Analog RGB 640 x 480 31.47 59.94 800 x 600 37.88 60.32 1024 x 768 48.36 60.00 1360 x 768 47.71 60.00 1280 x 1024 63.98 60.00 1920 x 1080 67.50 60.00...
DIGITAL SIGNAGE Adjusting OSD and Users can automatically adjust the picture mode according to the input mode. explanation of its 1. Press Menu button. Picture Menu items appear on the screen. function Picture Mode Custom 2. Press ↲ button to select “Picture” Icon. “Picture mode” is How to Select the Picture Custom ...
Page 17
DIGITAL SIGNAGE How to Set the Desired Users can manually adjust their desired picture Picture 1. Press Menu button. Custom Menu items appear on the screen. Brightness 2. Press ↲ button to select "Picture" Icon. Contrast "Picture mode" is highlighted. 3.
Page 18
DIGITAL SIGNAGE Users can adjust Color as users want. How to Select a Colour Tone 1. Press Menu button. Colour Tone Menu items appear on the screen. Colour Tone Normal 2. Press ↲ button to select "Picture" Icon. "Picture Mode" is highlighted. Green 3.
Page 19
DIGITAL SIGNAGE How to Set the Display Size Users can adjust the display scale as they want Picture Picture HDMI Picture Mode Picture Mode Custom Custom Colour Tone Wide Colour Tone Wide Size 4 : 3 Size 4 : 3 ...
Page 20
DIGITAL SIGNAGE 1. Press Menu button. How to set image adjustment Picture Menu items appear on the screen. in PC mode 2. Press ↲ button to select "Picture" Icon. (Supported only in PC mode) Auto Adjust Phase "Picture Mode" is highlighted. H-Posilion 3.
Page 21
DIGITAL SIGNAGE Users can adjust sound mode automatically as they want. How to Select the Audio 1. Press Menu button. Menu items appear on the screen. Mode Sound 2. Press ▲ / ▼ buttons to move to “Sound” Icon. 3. Press ↲ button to select “Sound” Icon. “Mode” is Mode Custom Volume...
Page 22
DIGITAL SIGNAGE Users can adjust sound mode automatically as they want. How to Adjust the Desired Audio Mode Sound Sound Mode Standard 10KHz Volume 3KHz Balance L50 R50 Equalizer 1KHz Auto Volume 300Hz Sound Mode Stereo 100Hz HDMI Sound HDMI ...
Page 23
DIGITAL SIGNAGE How to Select Auto Volume This function will automatically give a similar volume size to each channel. 1. Press Menu button. Sound Menu items appear on the screen. Mode 2. Press ▲ / ▼ buttons to move to "Sound" Icon. Volume 3.
Page 24
DIGITAL SIGNAGE How to Select HDMI Sound 1. Press Menu button. Sound Menu items appear on the screen. Mode 2. Press ↲ button to select “Sound” Icon. Volume “Mode” is highlighted. Balance 3. Press ▲ / ▼ buttons to move to “HDMI Sound”. Equalizer ...
Page 25
DIGITAL SIGNAGE How to Reset Setup 1. Press Menu button. Menu items appear on the screen. Reset 2. Press ↲ button to select "Setup" Icon. Time "Reset" is highlighted. Language 3. Press ▶ or ↲ buttons to select to "Reset". OSD Tone Key Lock 4.
Page 26
DIGITAL SIGNAGE <Go to step 6 if you need to set the "On or Off Timer"> Time 6. Press ▲ / ▼ buttons to move to "On or Off Timer". Clock 05 : 00 7. Press ▶ or ↲ buttons to select "On or Off Timer" . On Timer 00 : 00 8.
Page 27
DIGITAL SIGNAGE How to set OSD 1. Press Menu button. Setup Transparency Menu items appear on the screen. Reset 2. Press ↲ button to select "Setup" Icon. Time "Reset" is highlighted. Language 3. Press ▲ / ▼ buttons to move to "OSD Tone" OSD Tone 4.
Page 28
DIGITAL SIGNAGE This function prevents image burn-in problem on LCD screen. How to select Pixelshift 1. Press Menu button. Setup Menu items appear on the screen. Reset 2. Press ▲ / ▼ button to move to “Setup” Icon. Time ...
Page 29
DIGITAL SIGNAGE How to Set the Multi Multi Multi Function Temp Control H Set Count Multi Function V Set Count Display Sequence H Edge ADJ V Edge ADJ SET ID Master Compensation U Move Menu U Move Menu...
Page 30
DIGITAL SIGNAGE Set up Value installation item Product 1 Product 2 Product 3 Product 4 Product 5 Product 6 H Set Count V Set Count Display Sequence H Edge ADJ / These are the set up value to make up the un-displayed area of Bezel Part. V Edge ADJ It can be adjustable according to the contents SET ID...
Page 31
DIGITAL SIGNAGE To connect multiple monitors HDMI Cable to the PC in HDMI/DVI mode HDMI-IN DVI-OUT HDMI-IN DVI-OUT HDMI-IN DVI-OUT HDMI-IN DVI-OUT - D****A model example : D46AMA DVI-HDMI Cable (not included) Product 1 Product 2 Product 3 - D****B model DVI-IN DVI-OUT DVI-IN...
Page 32
DIGITAL SIGNAGE How to select Compensation This function emphasizes the signal level to prevent the signal loss when the displays are chained by HDMI cable. Multi Multi Temp Control H Set Count Multi Function V Set Count Display Sequence H Edge ADJ V Edge ADJ SET ID...
Page 33
DIGITAL SIGNAGE How to check the currently Multi Multi temperature Temp Control Fan Control Auto Multi Function Fan Active Temp 38 °C Hysteresis 5 °C 32 ℃ Temprature U Move Menu U Move Menu Enter Enter 1.
DIGITAL SIGNAGE Diagnosis When the product is not working properly, please check before you call customer center. Symptoms How to solve the problem It happens not to show the screen noise when the power is on. Therefore it is not a Screen displays late defect.
Page 35
DIGITAL SIGNAGE Symptoms How to solve the problem The screen displays check the volume up and down with remote control and audio connection cable without the sound. No sound from either Confirm the status of the sound balance on OSD menu and check the connection right speaker or left of speaker cable.
DIGITAL SIGNAGE Specifications Model D32AM* Model D42AM* 1920 x 1080 Pixel (Full HD) 1920 x 1080 Pixel (Full HD) Screen size (HxV/mm) 698.4(H) x 392.9(V) Screen size (HxV/mm) 930.24(H) x 523.26(V) Recommended resolution 1920 x 1080 @60Hz Recommended resolution 1920 x 1080 @60Hz...
Page 37
DIGITAL SIGNAGE Specifications Model D42EM* Model D55EM* 1920 x 1080 Pixel (Full HD) 1920 x 1080 Pixel (Full HD) Screen size (HxV/mm) 930.24(H) x 523.26(V) Screen size (HxV/mm) 1209.6(H) x 680.4(V) Recommended resolution 1920 x 1080 @60Hz Recommended resolution 1920 x 1080 @60Hz Power AC 100- 240V 50/60Hz Power...
Page 38
< REMOTE CONTROL SPEC > 1. REMOTE CONTROL WAVE FORM 2. REMOTE CONTROL KEY CODE TABLE 1) Remote Control System Infrared rey system Custom Code : 7788H fosc=455KHZ fc=fosc/2=37.917KHZ DATA POWER 0x80 2) Signal code MUTE 0x81 • Transmission MENU 0x95 - One pulse EXIT...
Page 39
< RS232C COMMAND SPEC > 1. CONFIGURATION 2) Command Type 1) SPEED : 9600 Baud/s, 8 bit, No parity, 1 Stop bit. Item Command Description hexa 2) Cable Connection power on 0x70 0x6E CONTROLLER(PC) power off 0x70 0x66 Power on, video out / on, video in / RS232C Cable off, video out / off, video in / 0x70 0x73...