Samsung SPP4251 Owner's Instructions Manual page 70

How to Set up Your PC Software (Windows only)
The Windows display-settings for a typical computer are shown below. However, the actual screens
on your PC will probably be different, depending upon your particular version of Windows and your
particular video card. But even if your actual screens look different, the same, basic set-up information
will apply in almost all cases. (If not, contact your computer manufacturer or Samsung Dealer.)
70
On the windows screen, select in the following
sequence : Start ➝ Settings ➝ Control Panel.
When the control panel screen appears, click on
"Display" and a display dialog-box will appear.
Select the "Settings" tab in the display dialog-
box.
The two key variables that apply to the PDP-PC
interface are "resolution" and "colors".
The correct settings for these two variables are:
• Size (sometimes called "resolution")
:640 x 480 pixels.
• Color: "32-bit" color
Shown at left is a typical screen for "Display"
dialog box.
If a vertical-frequency option exists on your
display settings dialog box, the correct value is
"60" or "60 Hz". Otherwise, just click "OK"
and exit the dialog box.
Continued...