Sanyo VI-2300 User Manual page 30

Sprint pcs vision phone
Hide thumbs Also See for VI-2300:
Table of Contents

Advertisement

Charging the Battery
Your Sprint PCS Vision Phone's LiIon battery is rechargeable and should
be charged as soon as possible so you can begin using your phone.
Keeping track of your battery's charge is important. If your battery
level becomes too low, your phone automatically turns off and you
will lose all the information you were just working on. For a quick
check of your phone's battery level, glance at the battery charge
indicator located in the upper-right corner of your phone's display
screen. If the battery charge is getting too low, the low battery icon
(
) appears and the phone sounds a warning tone.
Always use a Sprint-approved travel charger or vehicle power adapter
to charge your battery.
Warning!
Using the wrong battery charger could cause damage to your phone
and void the warranty.
Using the Travel Charger
To use the travel charger provided with your phone:
1.
Plug the travel charger into a wall outlet.
2.
Plug the other end of the travel charger into the accessories
connector at the bottom of your phone (with the battery
installed).
It takes approximately 3.5 hours to fully recharge a completely
rundown battery. With the Sprint-approved LiIon battery, you can
recharge the battery before it becomes completely run down.
Section 2A: Your Sprint PCS Vision Phone – The Basics
Charging when your phone is turned on:
The battery icon
The battery icon turns to
Charging when your phone is turned off:
The battery icon
CHARGING--Power Off--" is shown on the display while
charging. When the battery is completely discharged, it may
take several minutes until the message is shown on the
display. The battery icon turns to
changes to "CHARGING COMPLETE--Power Off--" when
charging is completed.
appears on the display while charging.
when charging is completed.
appears, and the message "BATTERY
, and the message
19

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents