Opel INSIGNIA Owner's Manual page 211

Hide thumbs Also See for INSIGNIA:
Table of Contents

Advertisement

Illustration shows baselevel DIC.
Illustration shows midlevel or uplevel
DIC.
When the setting page is displayed,
select Off or set alerts I to deactivate
alert function. Reactivate by selecting
On or alerts J.
When switching on the ignition, alert
function is deactivated.
Pop-up indication is displayed for
approx. 8 seconds in the DIC.
System reset
The content of the traffic sign memory
can be cleared in the setting menu of
the traffic sign assistant page by
pressing the SET/CLR button on the
turn signal lever or 9 on right steering
wheel control for a longer time. Select
and confirm Reset to clear traffic sign
assistant system. Upon successful
reset, a chime will sound and the
following symbol is indicated until the
next traffic sign is detected.
Driving and operating
In some cases, traffic sign assistant is
cleared up automatically by the
system.
Traffic sign detection in
conjunction with navigation
system
If the vehicle is equipped with a
navigation system, the following
features can be available:
■ constant indication of actual speed
limits
■ on heavy weather conditions, the
navigation data for speed limits are
displayed
Fault
The traffic sign assistant system may
not operate correctly when:
■ The area of the windscreen, where
the front camera is located, is not
clean.
■ Traffic signs are completely or
partially covered or difficult to
discern.
■ There are adverse environmental
conditions, e.g. heavy rain, snow,
direct sunlight or shadows. In this
209

Advertisement

Table of Contents
loading

Table of Contents