Adjusting Lock Function; Call Waiting; Mute; Redialing Calls - LG RD7130 User Manual

NOTE : To cancel Vibrate mode, press
Deactivating Vibrate mode is displayed.
NOTE : Selecting Vibrate mode will allow you to main-
tain your phone under Vibrate Mode even
when you turn it off and turn it back on.

Adjusting Lock Function

Used to prevent other persons from using your phone
without your permission.
There are two ways to enable the Lock Function - with
one key and by using the Menu.
1) In standby mode, to activate the lock mode quickly,
press the (for 3 seconds).
NOTE : To cancel the Lock Mode, Press Soft Key 2
Cncl, then enter your password (4 digits).
Default value is '0000'.

Call Waiting

Your cellular service provider may offer a call waiting
function. While a call is in progress, you may hear two
beeps indicating another incoming call. When call wait-
ing is enabled, you may put the active call on hold while
you answer the other incoming call. Check with
Reliance for information about this function.
1) Press to receive a waiting call.
2) Press again to switch between calls.
24
LG-RD7130
again until

Mute

The mute function prevents the other party from hearing
your voice, but allows you to hear the other party.
1) Press Soft Key 1 Menu and
2) To cancel Mute, press Soft Key 1 Menu and

Redialing Calls

1) Press to redial the last dialled number(s) in Call
History.
You can also dial any of the last 60 Missed/Received/
Dialled numbers stored in the Call History list

Speed Dialing

Speed dialing is a convenient feature, which allows you
to make phone calls quickly and easily. Your phone
recalls the phone number from your personal directory,
displays it briefly and then dials it.
To use Speed Dial register a phone number first (refer
to page 33).
1) Enter memory location number 1 to 99 .
2) Press .
3) To end the call, Press
One-Touch Speed Dialing: This feature enables you to
store your nine most frequently used numbers in your
phone book in memory locations (1 through 9)
LG-RD7130
during a call.
again.
.
25